The Smart Masonry Clean-Out System is a revolutionary system used to form Clean-Out Covers for High Lift grouting. It consists of a "T-Bolt," a re-usable "Nut" and a re-usable transparent "Window." The "T-Bolt" and "Nut" are made from hard ABS plastic. The transparent "Window" clean-out cover is made of poly carbonate, an extremely durable material commonly used in jet fighter canopies. While the "Nut" and Window" are re-usable, the exposed portion of the "T-Bolt" easily breaks off after removal of the "Nut" and "WIndow" to provide a fast, clean, professional and economical means of forming reinforced masonry clean-out covers.

Smart Transparent Window, T-Bolt & Nut

$ave money on Labor. Studies show a 25-30% increase in productivity when High Lift grouting is used instead of low lift grouting. This eliminates 2' to 4' lap bars that create obstacles for masons and reduces their productivity. Less lifting over rebar reduces a masons fatigue and allows for increased productivity.

$ave money on Rebar. Fewer lap bars required.

$ave money on grout pumping. Fewer grout pours equals fewer pumping cycles.

$ave money on grout. Fewer grout pours result in less overall grout waste.

Causes no damage to the face of the block and requires no patching of block as with the plywood/nailing method of forming clean-out covers.

Eliminates costly blow-outs that require chiseling and grinding.

Adds to your professional image. The Smart Masonry Clean-Out System, when installed, demonstrates the professionalism expected by engineers, architects, general contractors and especially inspectors. Plywood and hammer cut inspection holes lead to excessive waste and cleanup.

Advanced Placement - allows for inspection through the transparent "Window" and readiness to pour immediately after inspection. No need for hammers, nails, plywood and bruised thumbs.

Quick Installation - can be installed and removed in seconds, vastly reducing labor costs.